CNGBS Six Axis Handling Robot with Additional Vacuum Suction Device

Overview

• • This CNGBS six axis handling robot is configured with an additional suction device for vacuum based part handling.
• • The second vacuum unit extends coverage to flat panels, cartons and film packs that a single cup array cannot hold in one pass.
• • Vertical travel of 1850 mm and horizontal travel of 2100 mm let the head reach stacked layers and deep totes from one base position.
• • A 600 W servo drive keeps suction and arm motion synchronized during short pick and place cycles.
• • The head is built on an aluminium frame with replaceable cup modules, which keeps maintenance simple in daily production.
• • Control signals for vacuum and motion are routed through one harness, reducing cable wear at the wrist.

Specifications

Advantages

• • The additional suction device handles flat panels and cartons in the same cycle, so one robot replaces two single purpose heads.
• • 1850 mm vertical travel reaches the bottom layer of a stack without repositioning the robot base.
• • 2100 mm horizontal travel covers a wide pick face, which suits oversized panels and long cartons.
• • A 600 W servo drive holds vacuum and jaw timing steady at short cycle times.
• • A 20 kg head weight leaves payload margin for heavier panel formats.
• • Independent vacuum circuits keep grip stable when one cup loses contact on an uneven surface.
• • The arm accepts standard flange adapters, so the head can move to another robot in the fleet.
• • Replaceable cup modules let worn seals be changed in minutes instead of replacing the whole head.
• • One harness for vacuum and motion reduces cable wear at the wrist on high cycle lines.

Applications

• • Vacuum handling of flat panels and sheet parts.
• • Carton and film pack picking from mixed pallets.
• • Machine tending where part thickness changes between runs.
• • Loading panels into cutting, coating or assembly stations.
• • Depalletizing stacked boards and composite sheets.
• • Transferring composite sheets between cutting and layup tables.
• • Handling insulation boards and foam panels in building material plants.

FAQ

• • What does the additional suction device add? It extends vacuum coverage to flat panels and larger cartons that a single cup array cannot hold securely.
• • How much travel does the head provide? Vertical travel is 1850 mm and horizontal travel is 2100 mm on the tool stroke.
• • Which arm does it mount on? The head mounts on a standard six axis robot flange, and the adapter is matched to your arm interface.
• • Is the suction unit serviceable? Yes, cup modules and vacuum valves are replaceable items, and spares are available through the local network.
• • Which panels can it handle? It suits flat panels, cartons and film packs within the rated tool stroke and the arm payload.